Description

This barge is configured with 2 sections that are 50’ x 12’ x 5’. Both sections are raked on the bow with a 12” head log that is 1/2” thick plate. Each section has a solid 1/4” steel bulkhead making each section 2 compartments. There is 1-18” flush mounted access hatch per compartment in each section. All plate is A-36 1/4” steel. Framing is a 3” x 3” x 1/4” angle transverse truss frame spaced every 18” apart. The Connector Angles are 6” x 4” x 5/8” and are full length of barge. The connector holes are 1.75” diameter, spaced 48” apart, and the pins are 1.5” diameter with a pointed end and a single 3/8” square cap top.

Each section is air-tested, sand blasted, and coated with a 2-part salt resistant marine epoxy. One section per loaded trailer. Each section weighs approx: 30,000 lbs. each. Empty Draft is at 10.5” and can carry 80-100 tons with a 12” free board. Maximum deck load depends on size of actual load. It takes 69,000 lbs. to push this barge down 12” in the water.

Ask about other sizes!

Year
Manufacturer
Model
S/N
Condition
new
Added
Jun 14, 2019
Location
Indiana
ID
SG5339
Views
83

INQUIRE ABOUT LISTING