Description

This barge is configured with 2 sections that are 40’ x 10’ x 4’. Both sections are raked on the bow with a 12” head log that is 1/2” thick plate. Each section has a solid 1/4” steel bulkhead making each section 2 compartments. There is 1-18” flush mounted access hatch per compartment in each section.

All plate is A-36 1/4” steel. Framing is a 3” x 3” x 1/4” angle transverse truss frame spaced every 18” apart. The connector angles are 6” x 4”x 5/8”, and are full length of barge. The connector holes are 1.75” diameter spaced 48” apart and the pins are 1.5” diameter with a pointed end and a single 3/8” square cap top.

Each section is air-tested, sand blasted, and coated with a 2-part salt resistant marine epoxy. Both sections can be loaded double stacked on a drop deck trailer. Each section weighs approx. 20,000 LBS each. Empty draft is at 10.5” and can carry 45 Tons with a 12” free board. Maximum deck load depends on size of actual load. It takes 45,000 lbs. to push this barge down 12” in the water.

Ask about other sizes!

Year
Manufacturer
Model
S/N
Condition
new
Added
Jun 14, 2019
Location
Indiana
ID
SG5336
Views
193

INQUIRE ABOUT LISTING